- COMMERCIAL AND INDUSTRIAL COATINGS, DELIVERED WITH DISCIPLINE
Industrial Coatings and Commercial painting for buildings that cannot shut down.
We schedule around your operations across the Phoenix metro, working nights, weekends, and in phased zones so your facility stays open while the work is completed done. You receive a line-item scope, one accountable point of contact, and photos at the end of every workday.
Arizona ROC 365505, Class C-34—Insured & bonded—OSHA-trained W2 crews
Request a Commercial Quote. Please call us
LICENSED
Arizona ROC 365505, Class C-34, Commercial
INSURED AND BONDED
General liability and workers' compensation
WORKFORCE
W2 employees, not 1099 subcontractors
SAFETY TRAINING
OSHA 30-Hour Construction
ASSOCIATION
CPIA member since January 2026
- WHO WE WORK FOR
Four people sign off on a commercial coatings contract. We answer to all four.
Each one is measuring something different. The scope we write and the way we run the job are built around what each of them is accountable for.
GENERAL CONTRACTORS AND CONSTRUCTION MANAGERS
A trade partner who shows up and hits the schedule.
We don't stack trades, keep the site orderly for the trades behind us, and hand over clean closeout documentation. Our goal is to stay off your punch list.
How we work with GCs >
FACILITY MANAGERS AND OPERATIONS DIRECTORS
Your building maintained without disrupting the people inside it.
We phase the work around your occupancy, run nights and weekends where that is what it takes, and leave the space usable at the end of every shift.
Maintenance planning >
PROPERTY MANAGERS, MULTI-TENANT AND MULTI-SITE
One accountable vendor who handles volume without drama.
One point of contact across every property in the portfolio, consistent scoping and pricing, and turnover work that keeps pace with your leasing.
Portfolio work >
BUILDING OWNERS AND COMMERCIAL DEVELOPERS
The asset protected, and the project value with it.
The right coating system, prepared and applied to specification, so the building envelope lasts and the repair budget stays predictable.
Protective systems >
- FLAGSHIP WORK
Iron Mountain trusts our crews inside live data halls.
Data center work is the hardest credential in this trade to fake. The access is controlled, the tolerance for dust and debris is zero, and the equipment around you does not power down while you work.
Our documented practice inside these facilities is deliberately restrictive. We roll rather than spray, so nothing atomizes into the air handling. Buckets are brand new every day. Ladders are non-conductive fiberglass. Equipment is cleaned before it enters the building, and containment stays sealed while we are in it.
- FOD elimination and ESD control protocols
- Background-checked W2 crews for secure facilities
- Zero-downtime scheduling around live equipment
- Rolling only, with no spraying, to keep dust out of the machines
Working within an active facility containing overhead utility piping and electrical systems, our crew applied high-adhesion coatings to ensure clean lines, wear resistance, and minimal operational downtime.
Whether coating structural columns, interior commercial walls, or industrial office workspaces, DL Coatings LLC combines technical expertise with certified safety standards to enhance your facility's environment.
DL Coatings LLC provides specialized commercial interior and industrial facility painting designed for mission-critical operations.
Inside this Iron Mountain data center operations and plant maintenance office, our team completed a full interior transformation, repainting all interior perimeter walls and coating heavy structural steel support pillars in durable, industrial-grade satin black.
- WHAT WE DO
Five service lines, scoped to what commercial buildings actually need.
Grouped the way a facility budget is grouped, so you can find your scope quickly and see what it takes to hold up in this climate.
01
Industrial and Commercial Painting
Interior and exterior work for warehouses, distribution and manufacturing facilities, offices, retail, and apartment turnover at commercial scale.
02
Protective and Specialty Coatings
Epoxy and urethane floor systems, anti-static and ESD-compatible coatings, elastomeric wall coatings for the Arizona climate, and structural steel and tank coatings.
03
Data Center and Mission-Critical Coatings
A dedicated line for secure and live environments, built on FOD elimination, ESD control, background-checked crews, and scheduling that does not interrupt operations.
04
Surface Preparation and Building Envelope
Solid on its own, because preparation is where coatings succeed or fail. Sandblasting and abrasive preparation, pressure washing, and caulking, sealants, and joint waterproofing.
05
Commercial Roof Coatings
Launching alongside the C-42 commercial roofing classification, which is in progress. Reflective and waterproofing systems, coating versus replacement assessments, and daylight renewal.
Across all five
Preventative Maintenance Program
A scheduled service plan that protects the building over time and smooths the budget, so coating work stops arriving as an emergency.
Drywall is carried out as surface preparation and minor patching within the painting scope. We do not offer it as a standalone service.
- WHY IT MATTERS TO YOUR BUDGET
You are not buying paint. You are buying uptime, schedule, and budget certainty.
DL Coatings LLC excels as an industrial and commercial painting contractor capable of executing complex, high-risk access projects. Maneuvering within extremely tight clearance between towering cooling towers and multi-tier utility networks, our MEWP-certified technicians deployed articulated boom lifts to coat the south exterior elevation and dense mechanical runs.
We precision-coated the multi-diameter water supply lines using two-tone industrial green enamels designed for harsh thermal and outdoor exposure. Navigating congested conduits, electrical trays, and overhead industrial piping requires specialized rig positioning, zero-overspray controls, and total fall protection compliance. Where conventional painters decline difficult job sites, DL Coatings LLC brings certified technical skill, robust industrial protective coatings, and safe aerial navigation to heavy infrastructure.
Operational continuity
Your building does not stop, and neither do we. DL Coatings schedules around your operations, sequencing nights, weekends, and in phased zones so your facility stays open, your tenants stay comfortable, and your business stays profitable while we work.
Professional management
Every DL Coatings project runs through a single, accountable point of contact who manages it from estimate to final walkthrough. You always know who to call, and you always get an answer. When a condition changes, you hear about it from us first, with a transparent change order, before any added cost is incurred. No surprises, no chasing us for a status, no guessing where your project stands.
Asset protection and return
A commercial coating is not paint, it is protection. The right system, applied correctly, shields your structure from corrosion, weather, and wear, extends the life of the building envelope, and lowers what you spend on repairs down the road. We coat your facility to protect the asset, not just to cover it, and we build maintenance plans that keep that protection working year after year.
Communication discipline
We send you photos at the end of every workday. We confirm every request and approval in writing. We price a change order, explain what drove it, and get your signature before that work starts. You should never have to call us to find out where your project stands.
— OUR PROCESS
The DL Coatings Standard, seven steps from first walk to final closeout.
The same sequence on every project, so you know what happens next and who is responsible for it.
DL Coatings LLC specializes in industrial pipe painting and commercial surface restoration engineered for long-term corrosion resistance.
To prepare this cooling tower water return and supply system, our crew power-washed all metal surfaces to remove contaminants and ensure maximum coating adhesion.
Utilizing a scissor lift, our MEWP-certified technicians executed high-elevation applications with precision, applying durable industrial primers and weather-resistant green enamel finishes across directional water lines. Every project strictly adheres to OSHA standards, with painters outfitted in complete personal protective equipment (PPE)—including hard hats, high-visibility vests, protective eyewear, steel-toe boots, and safety harness fall protection systems. From power washing to specialized mechanical pipe coatings, DL Coatings LLC provides certified, safety-first commercial painting services across industrial facilities.
01 Discovery and site assessment
We walk the facility, document existing conditions with photos, and write down the operational constraints we will be working around.
02 Transparent scope and bid
A line-item proposal, typically within 24 to 48 hours of the walkthrough, spelling out surfaces, systems, coatings, square footage, schedule, and price.
03 Pre-project planning and scheduling
We build the plan around your operations, sequencing nights, weekends, or phased areas, and confirm crew, materials, access, and safety requirements before day one.
04 Surface preparation
Every surface is prepared to the standard the coating system requires, because preparation is the single biggest factor in how long the finish protects the building.
05 Application and daily communication
Crews work clean and protect your property and equipment. You receive daily photo updates and written confirmation of any request or approval.
06 Final walkthrough, closeout, and warranty
We walk the finished project with you, complete the punch list, and hand over clean documentation along with your workmanship warranty.
07 Ongoing maintenance partnership
Optional. A scheduled maintenance program that keeps finishes performing and prevents small issues from becoming expensive ones.
— RECURRING SERVICE
Keep the coating working on a schedule, instead of replacing it on an emergency.
Most commercial coating failures are not sudden. They start at a joint, a sealant line, or a south-facing elevation, and they stay cheap to fix for a long time before they stop being cheap to fix.
The Preventative Maintenance Program puts your building on a scheduled cycle of inspection and touch-up so the protection keeps doing its job, and so the spend lands in a budget you planned rather than one you had to fight for.
- Scheduled inspection cycles matched to the building and the exposure
- Documented condition reports you can put in front of an owner
- Budget smoothing across the year instead of one large capital hit
- Priority scheduling for facilities already on the program
- SAFETY AND COMPLIANCE
Safety is the first filter on your bid list. We built for that filter first.
Safety is the first thing we plan and the last thing we compromise. Every DL Coatings project begins with a daily safety briefing, and every crew member is OSHA-trained, background-checked, and equipped with full personal protective equipment. In mission-critical environments such as data centers, we follow strict FOD elimination and ESD control protocols, use non-conductive equipment near live electrical systems, and maintain spotless containment.
Prequalification support
Certificates of insurance and prequalification documentation are available on request for general contractor approvals and owner prequalification packages. Send those requests to [email protected].
Every member of our crew is a W2 employee carrying general workers compensation coverage, which removes the labor classification and coverage-gap risk that traditional 1099-only painters force on large general contractors and facility work.
Daniel Lujan, Founder and CEO
- OWNER LED
The company is new. The craft is not.
DL Coatings was formed in 2026. The trade behind it goes back three generations, and our founder and CEO, Daniel Lujan, brings more than 16 years of commercial and industrial painting experience to every scope we write.
That combination is the reason to hire us rather than the reason to hesitate. You get principal-level attention on your project and direct access to the owner, not a crew you have never met from a company too large to notice your building. Our reputation is actively being built on the family name, which is a stronger incentive than any contract clause.
— HONEST PROOF
The numbers we publish are the numbers we can prove.
We are a young company competing against firms founded decades ago. We are not going to invent a statistic to close that gap. These counters go live as the work is completed and the figures are verified.
DL Coatings LLC provides specialized industrial and commercial painting contractor solutions for critical utility infrastructure, including precision equipment lettering and safety stenciling. Following comprehensive substrate preparation and power washing, our technician sprays high-visibility yellow safety enamel onto an exterior backup generator fuel fill station at the Iron Mountain facility. Complete containment masking protects surrounding panels from overspray, ensuring razor-sharp operational instructions. Operating under stringent safety protocols, our certified crew wears dual-cartridge respirators, hard hats, eye protection, nitrile gloves, and high-visibility apparel. DL Coatings LLC delivers compliant, ultra-durable industrial coatings engineered for plant safety and seamless facility management.
Industrial and commercial projects completed
Bobs Furniture
Iron Mountain
Wells Fargo
Phoenix PD & Offices
School Facility
Arizona State Capitol
MAC Cosmetics
Indeed Headquarters
1,200,000
Square Feet
Coated
Including more than 800,000 sq. ft. for Iron Mountain alone
Reliability & Workmanship Metrics
On-Time Completion Rate
98% of projects finished on/ahead of schedule
After-Hours / Zero-Disruption Hours:
Worked to keep clients operational.
Verification &
Trust
Badges
Licensing & Insurance Limits
Insurance of $2M Commercial General Liability + Workers' Comp Covered"
- CLIENT FEEDBACK
What our clients say, attributed by title and facility type.
We attribute every testimonial by role and organization type rather than by personal name, because that is the attribution a procurement reader can weigh.
Testimonial 1: Iron Mountain
"Dan and the DL Coatings team knocked it out of the park. On high-demand job sites, their attention to safety protocols and cleanliness is unmatched. They set up, do flawless work, and pack out leaving the space cleaner than they found it. Whenever we have a facility project coming up, Dan is the first call we make."
John A, Iron Mountain
Testimonial 2: PPS - Piping & Welding
"DL Coatings is top-tier when it comes to industrial pipe and specialized system coatings. Their surface prep, speed, and precision allow us to keep critical operations online without missing a beat. It’s hard to find a contractor who takes spec requirements and turnaround times this seriously. We trust them completely."
Matt B, PPS - Piping & Welding
Testimonial 3: Holder Construction
"Working with DL Coatings on site has been seamless. Dan and his crew bring serious craftsmanship, respect our project schedule, and never compromise on job-site safety standards. They communicate well, hit milestone dates, and deliver clean, durable work every time."
Ryan L, Holder Construction
— WHERE WE WORK
Valley-wide coverage, based out of Phoenix. We service all of Arizona
We cover the Phoenix metro. We concentrate our crews and our scheduling in the North Scottsdale and Paradise Valley corridor, which is where most of our work sits and where we can hold the tightest response times.
Primary focus
Phoenix, Arizona
Secondary coverage
The entire state of Arizona including cities Mesa, Chandler, Gilbert, Glendale, Tempe, and the broader Valley.
Statewide specialty
Data centers anywhere in Arizona, large industrial facilities over 100,000 square feet, and multi-site corporate contracts.
Work in Action
DL Coatings LLC delivers high-performance industrial and commercial painting contractor solutions built on meticulous surface preparation. Before applying specialized protective coatings and facility identification stenciling to exterior industrial generators, our crew executes thorough pressure washing to strip away grease, grime, salt deposits, and environmental contaminants. Proper substrate preparation remains the critical foundation for long-term coating adhesion and corrosion resistance across heavy machinery and metal enclosures. Fully outfitted in required job-site PPE—including hard hats, high-visibility safety apparel, eye protection, and work boots—our team ensures safety compliance alongside expert surface prep. From high-pressure wash decontamination to precise lettering and protective industrial finishes, DL Coatings LLC provides certified field application tailored for critical industrial operations.
Send us the building. You get a line-item scope, typically within 24 to 48 hours.
Tell us the facility type, the square footage, and the constraint you are working around. We will walk it, scope it, and put a number in front of you that spells out what it covers.
General contractors and owners running a prequalification package can send insurance certificate and documentation requests directly to [email protected]
Monday through Friday, 7:00 AM to 5:00 PM.
Services
Company
Credentials
Arizona ROC 365505, Class C-34
Commercial Painting and Wall Covering
Effective through May 31, 2028
CPIA member since January 2026
Licensed, Bonded, & Insured: ROC 365505 (Commercial Painting)
Serving commercial & industrial clients across AZ.
© 2026 DL Coatings LLC. All rights reserved. https://DLCoatingsAZ.com