- SERVICE LINE 03

Data center and mission-critical coatings in Arizona.

Coatings work inside a live facility, where the equipment does not power down, the tolerance for airborne debris is zero, and access is controlled. We built this line around those constraints rather than adapting a repaint crew to them.

— WHY THIS IS A SEPARATE SERVICE LINE

Everything a normal paint crew does is a hazard in here.

Spraying puts atomized material into the air handling. A reused bucket carries dried flakes. An aluminum ladder near live gear is an electrical risk. A phone in a pocket is a security problem.

None of that is a reason to avoid the work. It is a reason to run it with a documented protocol and crews who have been briefed on it, which is what separates a data center contractor from a painter who has been let into a data center once.

Our practice here is deliberately restrictive, and we would rather lose a bid on schedule than win one by relaxing it.

— SPECIALIZED PROTOCOLS

Four disciplines that separate a data center contractor from a painter.

FOD elimination

Foreign object debris control governs how material enters the space, how it is contained while we work, and how the area is left. Nothing we bring in gets to become something you find later.

ESD control

Electrostatic discharge damage is invisible and it does not announce itself. We follow ESD control protocols and use anti-static and ESD-compatible coating systems where the specification calls for them.

Electrical safety awareness

Crews working near live electrical systems operate with NFPA 70E awareness and non-conductive equipment, including fiberglass ladders and poles rather than aluminum.

Background-checked W2 crews

Everyone who enters is a W2 employee who has been background-checked and carries genuine workers compensation coverage. There is no rotating subcontractor roster to re-vet at the gate.

- DOCUMENTED PRACTICE

The non-negotiables we work to inside a live facility.

These are not preferences. They are the standing rules for our crews on mission-critical sites, and they are what we brief on before anyone enters.

Rolling only, with no spraying, so nothing atomizes into the air handling
Brand-new buckets every day, never reused
New extension poles, so dried material cannot flake into the environment
Non-conductive fiberglass ladders near live electrical systems
Equipment cleaned spotless before it enters the building
Sealed containment maintained around the work area

- SCHEDULING

Zero downtime is the deliverable. The coating is how we get paid.

The facility does not stop, so the work is phased around it rather than the other way around.

Work sequenced around live equipment and operational windows
Night, weekend, and phased-zone execution where the site requires it
Coordination with your operations team before each phase begins
Daily photo documentation and written confirmation of every approval
A single accountable point of contact from estimate to closeout

- FLAGSHIP CLIENT

Iron Mountain trusts our crews inside live data halls.

Iron Mountain is our flagship data center client. Data center work is the hardest credential in this trade to fake, because the qualification barrier keeps casual competitors out long before anyone opens a paint can.

We are a young company, and we are not going to pretend otherwise. What we can point to is the kind of facility that has already let us in, and the protocol we ran while we were there.

Read the case study ›

- WHAT WE COAT

Surfaces and systems inside mission-critical facilities.

Interior wall and ceiling systems

Data hall corridors, support spaces, and back-of-house areas, rolled and contained to the standard above.

Anti-static and ESD-compatible coatings

Floor and wall systems specified for static-sensitive environments, applied to the manufacturer's requirements.

Cleanroom-compatible finishes

Mission-critical finishes selected for cleanability and low particulate shedding.

Structural steel

Exposed structural metal protected against corrosion with an industrial primer and finish system rather than standard paint.

Epoxy and urethane floor systems

Durable floor coatings for support areas, loading, and circulation space around the critical envelope.

Containment and support areas

Generator rooms, electrical rooms, and support corridors, coordinated around access and shutdown windows.

- PREVENTATIVE MAINTENANCE PROGRAM

Mission-critical facilities are where a scheduled cycle pays for itself.

Getting a crew badged, briefed, and inside a secure facility is the expensive part. Doing it on a planned cycle costs less per visit than doing it reactively, and it keeps the finish from ever becoming an operational issue.

How the program works ›

Planned access windows instead of emergency scheduling
The same background-checked crew returning each cycle
Written condition reporting after every visit
Budget smoothing across the year

Send us the facility and the access constraint.

Tell us the environment, the square footage, and the window you can give us. We will scope it against your protocol and put a line-item number in front of you, typically within 24 to 48 hours of the walkthrough.